Pa drawing po ng schematic diagram, thank you."Two lamps, first lamp controlled by 2 3-way switch and the second lamp is controlled by single pole switch"
Answer (1)
- Power Source: The circuit starts with a circuit breaker (CB).- First Lamp (3-Way Control): The power flows from the CB to a junction box (J). From the junction box, two wires go to the two 3-way switches (S3W). The other two wires from the 3-way switches connect to the first lamp (L).- Second Lamp (Single-Pole Control): The power flows from the CB to the single-pole switch (S1). The other wire from the single-pole switch connects to the second lamp (L). How It Works: - First Lamp: The 3-way switches work in pairs to control the first lamp. When either of the 3-way switches is turned on, the circuit is completed, and the lamp lights up. When both 3-way switches are turned off, the circuit is broken, and the lamp turns off.- Second Lamp: The single-pole switch directly controls the second lamp. When the switch is on, the circuit is complete, and the lamp lights up. When the switch is off, the circuit is broken, and the lamp turns off. This schematic diagram provides a basic representation of the wiring setup. You can add more details, such as wire colors and types, depending on your specific needs.
